Bell housings, elastic couplings and transmission driving flanges; pressure and level switches; filling and breathing plugs, level indicators; test couplings, test hoses, measuring devices and accessories for leak‐free pressure monitoring; pipes’ clamps and brackets.
Select the family of products you need, to see the technical features that matter to you in detail.
High torque transmission at small disc size and low weight; transmission reversibility; noise rejection, damping and lowering of torque peaks @ changing the frequencies of drive shafts; maintenance-free; range of nominal transmissible toque from 100 up to 30.000 Nm; range of maximum driving speed from 2.600 up to 17.000 rpm.
.
.
.
.
.
They are used for mechanical coupling between the driving engine and the hydraulic pump mounting flange; driving flanges and elastic couplings complete the transmission between the crankshaft and the pump shaft. The bells are made of steel and have unified dimensions to the SAE standards of the fly wheel covers.
.
Available in 2 versions for pressures of 3,000 and 6,000 PSI to ISO 6162; the first covers sizes from DN 13 (1/2 ") to DN 127 (5"), the second covers sizes from DN 13 (1/2 ") to DN 51 (2"); threaded options BSP, NPT, UNF or welded, straight or 90° elbows; also available are fixing screws, o-rings, and other accessories.
Available in 2 versions for pressures of 3,000 and 6,000 PSI to ISO 6162; the first covers sizes from DN 13 (1/2 ") to DN 127 (5"), the second covers sizes from DN 13 (1/2 ") to DN 51 (2"); threaded options BSP, NPT, UNF or welded, straight or 90° elbows; also available are fixing screws, o-rings, and other accessories.
An unequaled range of clams for rigid and flexible pipe fittings. They include standard and heavy series in single and multiple versions with bolted, welded and adhesive fastening in plastics or metal for the widest range of mobile and industrial hydraulic applications for fluid power and lubrication. According to DIN standards and conform to various international specification.
Wide range of mini fittings, flexible mini hoses and accessories for fluid sampling directly from leak-free power circuits, in hydraulic systems for mobile and industrial machines. Screwed fittings and fittings for measuring pipes, complying with international standards. The ability to match the measurement and control instruments in our range makes the complete system to monitor all the functional parameters of the fluid power circuits.
Visual/electric level indicators for hydraulic tanks; max. tank pressure 2 bar; 5 sizes from 127 up to 305 mm; Viton® sealing; optional integral electric level switch with IP 67 protection.
Ability of the end-user to adjust the switching level and temperature; max. current 0.5 A on level swith and 2 A on temperature switch IP 65 protection rating; 1 or 2 level contacts available; optional temperature sensor; standard electrical function: N.C., opens at falling level and at rising temperature
Top tank mounting; air flow range from 700 up to 1.500 l/min; filter element rating 3 µ absolute; water holding capacity from 86 up to 576 ml; ports from 3/4" up to 1"1/4 BSP.
To be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments; max. tank pressure 0,7 bar; temperature range -40 to +120°C; 4 sizes from Ø 45 mm up to Ø 105 mm.
